Overview

This article details the instructions for installing or updating a CMS 8, 9, or TEN Workstation.

Prerequisite

Before you begin installing or updating your workstation please check that you meet the requirements for all the steps below.

Step 1: Workstation System Requirements

To verify that your system meets CMS system requirements please review : http://wiki.newhavensoftware.com/index.php/CMS_System_Requirements#CMS_workstations

Step 2: Setup a mapped drive to the CMS server

Note: This is only needed if you are installing a new workstation. For Information on how to set up a mapped drive please review the video : http://youtu.be/D1IBcjWCmPs

Step 3: Obtain the CMS Installer

Locate the last CMS update used, typically found in the \Updates subdirectory of the \NewHaven Software share (where you should now have a drive mapped to)

or

visit http://updates.newhavensoftware.com/

For information on using the update page and downloading the installer please review the video : http://youtu.be/dBbd94k7b0A (Note: The video is focused on Windows XP, however, the setup steps are the same for Windows 7/10.

Workstation Install/Update

Note: The steps between updating or installing a CMS workstation are the same. Once you have verified that you meet the above prerequisites, follow the instructions below to Install/Update your workstation.

To begin double click the CMS installer, then follow the screenshots shown below.